久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

標題: 發一個利用兩個IIC數字光傳感器（BH1750），進行平面定位 [打印本頁]
作者: 小狗吃大白菜    時間: 2018-3-31 16:42
標題: 發一個利用兩個IIC數字光傳感器（BH1750），進行平面定位
看了去年電賽，在網上查呢下，很少有資料分享，最近剛好在做可見光定位，所以先將寫的兩個IIC數字光傳感器（BH1750）,采用差分方式進行定位程序分享下，還在改進中，完成后將全部開放！（用的是arduino UNOd的板子）

arduino源程序如下:
  1. #include <Wire.h> //BH1750 IIC Mode
  2. #include <math.h>
  3. #include <SPI.h>  
  4. #include <Wire.h>  
  5. #include <Adafruit_GFX.h>  
  6. #include <Adafruit_SSD1306.h>  
  7. int potpin=0;
  8. int a;//定義模擬接口0
  9. int now;
  10. int BH1750address0 = 0x5c; //setting i2c address
  11. int BH1750address1 = 0x23;
  12. uint16_t val0=0;
  13.   uint16_t val1=0;
  14. byte buff0[2];
  15. byte buff1[2];
  16. #define OLED_RESET 4  
  17. Adafruit_SSD1306 display(OLED_RESET);  
  18.   
  19. static const unsigned char PROGMEM logo[] =  
  20. {   

  22. /*--  調入了一幅圖像：這是您新建的圖像  --*/
  23. /*--  寬度x高度=128x64  --*/
  24. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  25. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  26. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  27. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  28. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  29. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  30. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  31. 0x00,0x00,0x00,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  32. 0x00,0x00,0x01,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  33. 0x00,0x00,0x01,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  34. 0x00,0x00,0x01,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  35. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  36. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  37. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  38. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  39. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  40. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  41. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  42. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  43. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  44. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  45. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  46. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  47. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  48. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  49. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  50. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  51. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  52. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  53. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  54. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  55. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  56. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  57. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  58. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  59. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  60. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  61. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  62. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  63. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  64. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  65. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  66. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  67. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  68. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  69. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  70. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  71. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  72. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  73. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  74. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  75. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  76. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  77. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  78. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  79. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  80. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  81. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  82. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  83. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  84. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  85. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  86. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  87. 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00

  89. };  
  90.    
  91. #if (SSD1306_LCDHEIGHT != 64)  
  92. #error("Height incorrect, please fix Adafruit_SSD1306.h!");  
  93. #endif  
  94.   int outputValue,outputValue1;
  95. void setup()
  96. {  outputValue=0;
  97.   outputValue1=0;      
  98.   Wire.begin();
  99.   Serial.begin(19200);
  100.   display.begin(SSD1306_SWITCHCAPVCC, 0x3C);   
  101.   display.clearDisplay();  
  102. }

  104. void loop()
  105. {a=analogRead(potpin);//讀取模擬接口0 的值，
  106.   int i,j;
  107. // uint16_t val0=0;
  108. // uint16_t val1=0;
  109.   BH1750_Init(BH1750address0);
  110.   BH1750_Init(BH1750address1);
  111.   delay(200);

  113.   if(2==BH1750_Read0(BH1750address0))
  114.   {
  115.     val0=((buff0[0]<<8)|buff0[1])/1.2;
  116.      Serial.print(now);
  117.   Serial.print( ",");
  118.     Serial.print(val0,DEC);     
  119.     Serial.print(",");
  120.       Serial.print(val1,DEC);     
  121.    Serial.print(",");
  122.        Serial.print(val1,DEC);     
  123.     Serial.print(";");
  124.   }
  125.   delay(10);

  127. if(2==BH1750_Read1(BH1750address1))
  128.   {
  129.     val1=((buff1[0]<<8)|buff1[1])/1.2;
  130.      Serial.print(now);
  131.   Serial.print( ",");
  132.     Serial.print(val0,DEC);     
  133.    Serial.print(",");
  134. Serial.print(val1,DEC);     
  135.     Serial.print(",");
  136.     Serial.print(val1,DEC);     
  137.     Serial.print(";");
  138.    
  139.   }
  140.   delay(10);
  141.   
  142.    outputValue = map(val0, 0, 700, 0, 64);
  143.     outputValue1 = map(val1, 0, 700, 0, 128);
  144.    display.drawBitmap(outputValue1,outputValue , logo, 128, 64,1);  //在坐標X0，Y0的位置開始顯示圖片  
  145.                                                //128是取模軟件顯示的寬度  
  146.                                                //64是取模軟件顯示的高度  
  147. display.display();                           //把緩存的都顯示  
  148.   delay(1);  
  149.    
  150.   display.clearDisplay();    //清除屏幕  
  151.   delay(10);
  152. }

  154. int BH1750_Read0(int address) //
  155. {
  156.   int i=0;
  157.   Wire.beginTransmission(address);
  158.   Wire.requestFrom(address, 2);
  159.   while(Wire.available()) //
  160.   {
  161.     buff0[i] = Wire.read();  // receive one byte
  162.     i++;
  163.   }
  164.     Wire.endTransmission();  
  165.     return i;
  166. }

  168. int BH1750_Read1(int address) //
  169. {
  170.   int j=0;
  171.   Wire.beginTransmission(address);
  172.   Wire.requestFrom(address, 2);
  173.   while(Wire.available()) //
  174.   {
  175.     buff1[j] = Wire.read();  // receive one byte
  176.     j++;
  177.   }
  178.   Wire.endTransmission();  
  179.   return j;
  180. }

  182. void BH1750_Init(int address)
  183. {
  184.   Wire.beginTransmission(address);
  185.   Wire.write(0x10);//1lx reolution 120ms
  186.   Wire.endTransmission();
  187. }

復制代碼

下載：
bh1750s.rar (1.32 KB, 下載次數: 22)

作者: 17051193108    時間: 2019-4-14 10:19
樓主做完了嗎？我用51單片機去做，速度趕不趕得上
作者: 大貓8888    時間: 2019-6-28 15:55
樓主做完了嗎？



歡迎光臨 (http://m.zg4o1577.cn/bbs/) Powered by Discuz! X3.1
主站蜘蛛池模板： 在线视频a| 99精品久久久 | 最新中文字幕av | 成人片免费看 | 久久久久久久国产 | 瑟瑟视频在线观看 | 欧美午夜视频 | 日韩一级片视频 | 涩涩的视频| 久久青青操 | 日韩特黄 | 免费在线看a | 免费不卡视频 | 色噜噜狠狠一区二区三区果冻 | 青青草免费观看 | 一区二区三区免费在线观看 | 国产又色又爽又黄又免费 | 国产一区二区精品在线 | 免费毛片在线播放 | 麻豆国产91| 羞羞的视频在线观看 | 日韩欧美高清视频 | 欧美福利视频 | 在线免费看av | 亚洲影院在线 | 亚洲午夜激情 | 久久久久女人精品毛片九一 | 久久久久久一区 | 婷婷色网| 欧美日韩成人 | 亚洲免费精品视频 | 一区二区三区四区精品 | 蜜桃视频成人 | 国产激情一区二区三区 | 日韩少妇av | 酒色成人网 | 欧美日韩免费在线 | 成人精品一区二区三区 | 久操精品视频 | 久久视频一区 | 日韩精品视频一区二区三区 |