The PS/2 device interface, used by many modern mice and keyboards, was developed by IBM and originally
appeared in the IBM Technical Reference Manual. However, this document has not been printed for many
years and as far as I know, there is currently no official publication of this information. I have not had access
to the IBM Technical Reference Manual, so all information on this page comes from my own experiences as
well as help from the references listed at the bottom of this page.
PS/2 設備接口用于許多現代的鼠標和鍵盤 它是由 IBM開發并且最初出現在 IBM技術參考手冊里 但
是 當我知道的時候這篇文件就已經很多年沒有印刷了 因此關于這個內容現在沒有官方的出版物 我
無法訪問 IBM 的技術參考手冊 所以本網頁中的所有信息都來自于我自己的經驗及本頁最下面列出的
參考的幫助
譯者注 這些參考的條目在本章的結尾處
This document descibes the interface used by the PS/2 mouse, PS/2 keyboard, and AT keyboard. I'll cover
the physical and electrical interface, as well as the protocol. If you need higher-level information, such as
commands, data packet formats, or other information specific to the keyboard or mouse, I have written
separate documents for the two devices:
這個文件描述了用于 PS/2 鼠標 PS/2 鍵盤及 AT 鍵盤的接口 我將論及物理和電氣接口也包括協議
如果你需要更高級的信息 諸如命令 數據包的格式或者其他關于鍵盤鼠標的特別細節 那么我對這兩
種設備寫了獨立的文件
ps2技術參考.rar
(604.29 KB, 下載次數: 76)
