久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

標題: 基于stm32f103c8板子的小車的電機驅動源碼 [打印本頁]
作者: POTATO    時間: 2018-7-7 10:36
標題: 基于stm32f103c8板子的小車的電機驅動源碼
這是基于stm32f103c8板子的小車的電機驅動的keil工程源代碼，這里是直流電機，由B6，B7,B8,B9四個管口輸出PWM波來控制，前兩個管口與B電機相關，后兩個與A電機相關，兩個口的PWM波占空比不同，產生壓差，使電機轉動

單片機源程序如下:
  1. #include "PWM.h"
  2. #include "stm32f10x.h"


  5. void TIM4_Init(void)
  6. {
  7.         TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
  8.         GPIO_InitTypeDef GPIO_InitStructure;
  9.         TIM_OCInitTypeDef  TIM_OCInitStructure;
  10.        
  11.         RCC_APB2PeriphClockCmd( RCC_APB2Periph_GPIOB , ENABLE);
  12.         //GPIO_InitTypeDef GPIO_InitStructure;
  13. //  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6|GPIO_Pin_7|GPIO_Pin_8|GPIO_Pin_9;
  14. //  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  15. //  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  16. //  GPIO_Init(GPIOB, &GPIO_InitStructure);
  17. //        GPIO_SetBits(GPIOB , GPIO_Pin_6);
  18. //        GPIO_SetBits(GPIOB , GPIO_Pin_7);
  19. //        GPIO_SetBits(GPIOB , GPIO_Pin_8);
  20. //        GPIO_SetBits(GPIOB , GPIO_Pin_9);
  21.        
  22.         GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6;//對應BIN2
  23.   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  24.   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
  25.   GPIO_Init(GPIOB, &GPIO_InitStructure);
  26.        
  27.         GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7;//對應BIN1
  28.   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  29.   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
  30.   GPIO_Init(GPIOB, &GPIO_InitStructure);
  31.        
  32.         GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;//對應AIN2
  33.   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  34.   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
  35.   GPIO_Init(GPIOB, &GPIO_InitStructure);
  36.        
  37.         GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;//對應AIN1
  38.   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  39.   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
  40.   GPIO_Init(GPIOB, &GPIO_InitStructure);
  41.                  
  42.   RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4 , ENABLE);
  43.         //TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
  44.   TIM_TimeBaseStructure.TIM_Prescaler = 0;   
  45.         TIM_TimeBaseStructure.TIM_Period = 5000 ;
  46.   TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1 ;//TIM_CKD_DIV1;          
  47.   TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
  48.   TIM_TimeBaseInit(TIM4, &TIM_TimeBaseStructure);

  50.         //TIM_OCInitTypeDef  TIM_OCInitStructure;
  51.         TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;        
  52.   TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
  53.         TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Enable;
  54.   TIM_OCInitStructure.TIM_Pulse =  2500;     
  55.   TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_Low;
  56.   TIM_OCInitStructure.TIM_OCNPolarity = TIM_OCNPolarity_High;
  57.   TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Set;
  58.   TIM_OCInitStructure.TIM_OCNIdleState = TIM_OCIdleState_Reset;       
  59.   TIM_OC1Init(TIM4 , &TIM_OCInitStructure);
  60.   TIM_OC1PreloadConfig(TIM4 , TIM_OCPreload_Enable);
  61.   TIM_ARRPreloadConfig(TIM4 , ENABLE);   
  62.         TIM_CtrlPWMOutputs(TIM4 , ENABLE);
  63.         TIM_Cmd(TIM4 , ENABLE);       
  64.        
  65.         TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;        
  66.   TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
  67.         TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Enable;
  68.   TIM_OCInitStructure.TIM_Pulse =  0;     
  69.   TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_Low;
  70.   TIM_OCInitStructure.TIM_OCNPolarity = TIM_OCNPolarity_High;
  71.   TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Set;
  72.   TIM_OCInitStructure.TIM_OCNIdleState = TIM_OCIdleState_Reset;       
  73.   TIM_OC2Init(TIM4 , &TIM_OCInitStructure);
  74.   TIM_OC2PreloadConfig(TIM4 , TIM_OCPreload_Enable);
  75.   TIM_ARRPreloadConfig(TIM4 , ENABLE);   
  76.         TIM_CtrlPWMOutputs(TIM4 , ENABLE);
  77.         TIM_Cmd(TIM4 , ENABLE);       
  78.        
  79.         TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;        
  80.   TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
  81.         TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Enable;
  82.   TIM_OCInitStructure.TIM_Pulse =  2500;     
  83.   TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_Low;
  84.   TIM_OCInitStructure.TIM_OCNPolarity = TIM_OCNPolarity_High;
  85.   TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Set;
  86.   TIM_OCInitStructure.TIM_OCNIdleState = TIM_OCIdleState_Reset;       
  87.   TIM_OC3Init(TIM4 , &TIM_OCInitStructure);
  88.   TIM_OC3PreloadConfig(TIM4 , TIM_OCPreload_Enable);
  89.   TIM_ARRPreloadConfig(TIM4 , ENABLE);   
  90.         TIM_CtrlPWMOutputs(TIM4 , ENABLE);
  91.         TIM_Cmd(TIM4 , ENABLE);       
  92.        
  93.         TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;        
  94.   TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
  95.         TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Enable;
  96.   TIM_OCInitStructure.TIM_Pulse =  0;     
  97.   TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_Low;
  98.   TIM_OCInitStructure.TIM_OCNPolarity = TIM_OCNPolarity_High;
  99.   TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Set;
  100.   TIM_OCInitStructure.TIM_OCNIdleState = TIM_OCIdleState_Reset;       
  101.   TIM_OC4Init(TIM4 , &TIM_OCInitStructure);
  102.   TIM_OC4PreloadConfig(TIM4 , TIM_OCPreload_Enable);
  103.   TIM_ARRPreloadConfig(TIM4 , ENABLE);   
  104.         TIM_CtrlPWMOutputs(TIM4 , ENABLE);
  105.         TIM_Cmd(TIM4 , ENABLE);       
  106.         //TIM1->CCR1 = 200;
  107.        
  108. }

復制代碼

所有資料51hei提供下載:
驅動電機.rar (390.61 KB, 下載次數: 36)



作者: programc3    時間: 2018-9-8 10:24
很不錯



歡迎光臨 (http://m.zg4o1577.cn/bbs/) Powered by Discuz! X3.1
主站蜘蛛池模板： 一级黄视频 | 日韩大片在线观看 | 免费看a | 中文字幕免费视频 | 欧美视频亚洲视频 | 欧美性猛交99久久久久99按摩 | 天天爽爽 | 在线亚洲一区 | 欧美一级片免费 | 欧美性受xxxx黑人xyx性爽 | 91欧美日韩| 久久精品免费观看 | 欧美不卡一区二区三区 | 亚洲精品乱码久久久久久蜜桃91 | 久久狠| 91国内视频 | 成人亚洲视频 | 91久久综合亚洲鲁鲁五月天 | 国产精品美女久久 | 欧美成人精品 | 欧美日韩亚洲视频 | 成人爱爱 | 亚洲视频中文字幕 | 日日干夜夜骑 | 日韩中文在线视频 | 亚洲精品1 | 偷拍一区二区 | 欧美日韩成人一区二区三区 | 精品国产欧美一区二区三区成人 | 色婷婷亚洲 | 午夜在线视频 | 色综合五月天 | 中文字幕在线免费观看 | 91爱爱网站 | 免费一级a毛片 | 欧美精品自拍 | 欧美激情一区 | 视频一区二区在线播放 | 奇米影视亚洲春色 | 日狠狠| 日本成人一区二区三区 |