久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

標題: 基于fpga的輸入信號邊沿濾波(上升沿/下降沿)微秒 veilog [打印本頁]

作者: 51hei圓圓 時間: 2024-1-23 00:56
標題: 基于fpga的輸入信號邊沿濾波(上升沿/下降沿)微秒 veilog
濾波效果如圖所示

直接上代碼

veilog源碼
module my_filter_us(
      input clk,//200Mhz
      input rst,
      input pulse_in,
      input[7:0] pulse_delay,//濾波數值輸入，單位us  1-100
      output reg pulse_out=1

);
reg[19:0] cnt_delay=0;
reg[3:0] filter_satae=3;

wire[19:0] data;
assign data=pulse_delay*200;
reg[19:0] cnt_rst=0;
reg rst_n=0;

always @(posedge clk)
      begin
            if(cnt_rst<100000)
                     begin
                              cnt_rst<=cnt_rst+1;
                     end
            else
                     begin
                              rst_n<=1;
                     end
      end

always @(posedge clk or negedge rst_n)
      begin
            if(!rst_n)
                     begin

                     end
            else
                     begin
                              case(filter_satae)
                                    0:       begin
                                                      if(pulse_out==0)
                                                            begin
                                                                     filter_satae<=filter_satae+1;
                                                            end
                                                      else if(cnt_delay<data)
                                                                     begin
                                                                              if(pulse_in==0)
                                                                                    begin
                                                                                             cnt_delay<=cnt_delay+1;
                                                                                    end
                                                                              else
                                                                                    begin
                                                                                             cnt_delay<=0;
                                                                                             //data<=pulse_delay*200;
                                                                                    end
                                                                     end
                                                      else if(pulse_in==0)
                                                            begin
                                                                     pulse_out<=0;
                                                                     cnt_delay<=0;
                                                            end
                                             end
                                    1:       begin
                                                      filter_satae<=filter_satae+1;
                                             end
                                    2:       begin
                                                      if(pulse_out==1)
                                                            begin
                                                                     filter_satae<=filter_satae+1;
                                                            end
                                                      else if(cnt_delay<data)
                                                                     begin
                                                                              if(pulse_in==1)
                                                                                    begin
                                                                                             cnt_delay<=cnt_delay+1;
                                                                                    end
                                                                              else
                                                                                    begin
                                                                                             cnt_delay<=0;
                                                                                             //data<=pulse_delay*200;
                                                                                    end
                                                                     end
                                                      else if(pulse_in==1)
                                                            begin
                                                                     pulse_out<=1;
                                                                     cnt_delay<=0;
                                                            end

                                             end
                                    3:       begin
                                                      filter_satae<=0;
                                                      //data<=pulse_delay*200;
                                             end

                              endcase
                     end
      end

endmodule

仿真
`timescale 1ns/1ps
module my_filter_us_tb(
);
reg clk=0;
reg pulse_in=0;
reg [7:0]pulse_delay=10;
wire pulse_out;

my_filter_us u1(
      .clk(clk),
      .pulse_in(pulse_in),
      .pulse_delay(pulse_delay),
      .pulse_out(pulse_out)
);

initial begin
forever
      begin
            clk=0; #2 clk=1; #3;//200Mhz

      end
end

initial begin
forever
      begin

            pulse_in=0; #60000;
            pulse_in=0; #3000 pulse_in=1; #3000;
            pulse_in=0; #3000 pulse_in=1; #3000;
            pulse_in=0; #3000 pulse_in=1; #3000;
            pulse_in=0; #3000 pulse_in=1; #3000;

            pulse_in=1; #60000;
            pulse_in=0; #3000 pulse_in=1; #3000;
            pulse_in=0; #3000 pulse_in=1; #3000;
            pulse_in=0; #3000; pulse_in=1; #3000;
            pulse_in=0; #3000; pulse_in=1; #3000;

      end
end
endmodule

歡迎光臨 (http://m.zg4o1577.cn/bbs/)