久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

標題: lcd12864點陣液晶-無字庫 顯示 單片機程序源代碼 [打印本頁]
作者: liuda    時間: 2015-1-21 21:47
標題: lcd12864點陣液晶-無字庫 顯示 單片機程序源代碼
     今天終于把點陣液晶顯示出漢字了,自學太吃力,點陣遭遇經歷差點把我打擊的放棄了,這些時間心里真是很矛盾,當我看到單片機真是既愛又怕,就;連這個簡單的液晶驅動在看了很多資料,無數次改寫程序都是失敗結局.每次新的思路閃現總讓我興奮,但結果都很失望...........
呵呵,今天的小進步做為給自己鼓勵, 希望自己如蝸牛般急馳學習單片機!堅持.....堅持.....

/本程序為LM12864L系列顯示程序#include<reg52.h>

  1. #include<intrins.h>
  2. #define uchar unsigned char
  3. #define uint unsigned int
  4. #define lcd_bus P0
  5. sbit RS = P2^5;
  6. sbit RW = P2^4;
  7. sbit E = P2^3;
  8. sbit Cs1 = P2^0;
  9. sbit Cs2 = P2^1;
  10. sbit _RST = P2^2; //定義端口
  11. uchar code  dis[][32]={        //-- 單 --
  12.       0x00,0x00,0xF8,0x28,0x29,0x2E,0x2A,0xF8,
  13.       0x28,0x2C,0x2B,0x2A,0xF8,0x00,0x00,0x00,
  14.       0x08,0x08,0x0B,0x09,0x09,0x09,0x09,0xFF,
  15.       0x09,0x09,0x09,0x09,0x0B,0x08,0x08,0x00,
  16. //-- 片 --
  17.       0x00,0x00,0x00,0xFE,0x10,0x10,0x10,0x10,
  18.       0x10,0x1F,0x10,0x10,0x10,0x18,0x10,0x00,
  19.       0x80,0x40,0x30,0x0F,0x01,0x01,0x01,0x01,
  20.       0x01,0x01,0x01,0xFF,0x00,0x00,0x00,0x00,
  21. //-- 機 --
  22.       0x08,0x08,0xC8,0xFF,0x48,0x88,0x08,0x00,
  23.       0xFE,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,
  24.       0x04,0x03,0x00,0xFF,0x00,0x41,0x30,0x0C,
  25.       0x03,0x00,0x00,0x00,0x3F,0x40,0x78,0x00,
  26. //-- 是 --
  27.       0x80,0x80,0x80,0x80,0xBE,0xAA,0xAA,0xAA,
  28.       0xAA,0xAA,0xAA,0xBE,0x80,0x80,0x80,0x00,
  29.       0x00,0x40,0x20,0x10,0x0E,0x10,0x20,0x3F,
  30.       0x44,0x44,0x44,0x44,0x44,0x40,0x40,0x00,
  31. //-- 我 --
  32.       0x20,0x20,0x22,0x22,0xFE,0x21,0x21,0x20,
  33.       0x20,0xFF,0x20,0x22,0xAC,0x20,0x20,0x00,
  34.       0x04,0x04,0x42,0x82,0x7F,0x01,0x01,0x10,
  35.       0x10,0x08,0x07,0x1A,0x21,0x40,0xF0,0x00,
  36. //-- 們 --
  37.       0x80,0x40,0xF0,0x1C,0x03,0xF0,0x01,0x0E,
  38.       0x04,0x00,0x04,0x04,0x04,0xFC,0x00,0x00,
  39.       0x00,0x00,0x7F,0x00,0x00,0x7F,0x00,0x00,
  40.       0x00,0x00,0x00,0x20,0x40,0x3F,0x00,0x00,
  41. //-- 的 --
  42.       0x00,0xF8,0x8C,0x8B,0x88,0xF8,0x40,0x30,
  43.       0x8F,0x08,0x08,0x08,0x08,0xF8,0x00,0x00,
  44.       0x00,0x7F,0x10,0x10,0x10,0x3F,0x00,0x00,
  45.       0x00,0x03,0x26,0x40,0x20,0x1F,0x00,0x00,
  46. //-- 好 --
  47.       0x10,0x10,0xF0,0x1F,0x10,0xF0,0x80,0x82,
  48.       0x82,0x82,0xF2,0x8A,0x86,0x82,0x80,0x00,
  49.       0x80,0x43,0x22,0x14,0x0C,0x73,0x20,0x00,
  50.       0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00,
  51. //-- 朋 --
  52.       0x00,0x00,0xFE,0x92,0x92,0x92,0xFE,0x00,
  53.       0x00,0xFE,0x92,0x92,0x92,0xFE,0x00,0x00,
  54.       0x40,0x30,0x0F,0x00,0x20,0x40,0x3F,0x40,
  55.       0x30,0x0F,0x00,0x20,0x40,0x3F,0x00,0x00,
  56. //-- 友 --
  57.       0x08,0x08,0x08,0x08,0x08,0xC8,0x7F,0x48,
  58.       0x48,0x48,0x48,0xC8,0x08,0x08,0x08,0x00,
  59.       0x40,0x20,0x90,0x88,0x46,0x41,0x21,0x12,
  60.       0x0C,0x0C,0x13,0x20,0x60,0xC0,0x40,0x00,
  61. //-- 很 --
  62.       0x10,0x88,0xC4,0x23,0x1A,0x00,0xFE,0x4A,
  63.       0x4A,0xCA,0x4A,0x4A,0x7E,0x00,0x00,0x00,
  64.       0x01,0x00,0xFF,0x00,0x00,0x40,0xFF,0x40,
  65.       0x20,0x13,0x04,0x1A,0x33,0x62,0x20,0x00,
  66. //-- 想 --
  67.       0x08,0xC8,0x38,0xFF,0x18,0x68,0x08,0x00,
  68.       0xFE,0x2A,0x2A,0x2A,0x2A,0xFE,0x00,0x00,
  69.       0x01,0x40,0x70,0x01,0x38,0x40,0x40,0x44,
  70.       0x59,0x41,0x41,0x61,0x01,0x09,0x30,0x00,
  71. //-- 掌 --
  72.       0x00,0x0C,0x04,0x05,0x76,0x54,0x54,0x57,
  73.       0x54,0x54,0x76,0x05,0x04,0x0C,0x04,0x00,
  74.       0x00,0x10,0x15,0x15,0x15,0x55,0x95,0x7F,
  75.       0x15,0x15,0x15,0x15,0x14,0x10,0x00,0x00,
  76. //-- 握 --
  77.       0x08,0x08,0xFF,0x88,0x48,0x00,0xFE,0x2A,
  78.       0xAA,0x6A,0x2A,0x2A,0xAA,0x2E,0x20,0x00,
  79.       0x42,0x81,0x7F,0x00,0x40,0x30,0x4F,0x49,
  80.       0x49,0x49,0x7F,0x49,0x49,0x4B,0x40,0x00,
  81. //-- 這 --
  82.       0x40,0x42,0x44,0xCC,0x00,0x08,0x28,0x48,
  83.       0x89,0x0E,0xCA,0x38,0x08,0x08,0x00,0x00,
  84.       0x80,0x40,0x20,0x1F,0x20,0x40,0x50,0x48,
  85.       0x44,0x43,0x44,0x48,0x50,0x40,0x40,0x00,
  86. //-- 門 --
  87.       0x00,0x00,0xF8,0x01,0x06,0x00,0x02,0x02,
  88.       0x02,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,
  89.       0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,
  90.       0x00,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,
  91. //-- 知 --
  92.       0x40,0xA0,0x98,0x8F,0x88,0xF8,0x88,0x88,
  93.       0x00,0xF8,0x08,0x08,0x08,0xF8,0x00,0x00,
  94.       0x80,0x40,0x20,0x18,0x07,0x02,0x04,0x18,
  95.       0x00,0x7F,0x10,0x10,0x10,0x3F,0x00,0x00,
  96. //-- 識 --
  97.       0x40,0x41,0x4E,0xC4,0x00,0x00,0x00,0xFE,
  98.       0x82,0x82,0x82,0x82,0xFE,0x00,0x00,0x00,
  99.       0x00,0x00,0x00,0x7F,0x20,0x90,0x40,0x30,
  100.       0x0E,0x00,0x00,0x02,0x0C,0x70,0x20,0x00,
  101. //-- 書 --
  102.       0x80,0x80,0x88,0x88,0x88,0x88,0xFF,0x88,
  103.       0x88,0x88,0x88,0xFA,0x84,0x9C,0x08,0x00,
  104.       0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x00,
  105.       0x00,0x10,0x20,0x40,0x30,0x0F,0x00,0x00,
  106. //-- 山 --
  107.       0x00,0x00,0xE0,0x00,0x00,0x00,0x00,0xFF,
  108.       0x00,0x00,0x00,0x00,0x00,0xE0,0x00,0x00,
  109.       0x00,0x20,0x7F,0x20,0x20,0x20,0x20,0x3F,
  110.       0x20,0x20,0x20,0x20,0x20,0x7F,0x00,0x00,
  111. //-- 有 --
  112.       0x00,0x04,0x84,0x44,0xE4,0x34,0x2C,0x27,
  113.       0x24,0x24,0x24,0xE4,0x04,0x04,0x04,0x00,
  114.       0x02,0x01,0x00,0x00,0xFF,0x09,0x09,0x09,
  115.       0x29,0x49,0xC9,0x7F,0x00,0x00,0x00,0x00,
  116. //-- 路 --
  117.       0x00,0x7E,0x22,0xE2,0x3E,0x20,0x10,0x08,
  118.       0x0F,0xB4,0x44,0xA4,0x9C,0x04,0x00,0x00,
  119.       0x20,0x3F,0x20,0x1F,0x11,0x11,0x02,0x7F,
  120.       0x23,0x22,0x22,0x22,0x7E,0x03,0x01,0x00,
  121. //-- 勤 --
  122.       0x04,0x04,0xC4,0x5F,0x54,0xF4,0x54,0x5F,
  123.       0xC4,0x14,0x10,0xFF,0x10,0x10,0xF0,0x00,
  124.       0x00,0x80,0x95,0x95,0x95,0x7F,0x55,0x55,
  125.       0x95,0x60,0x1C,0x03,0x20,0x60,0x3F,0x00,
  126. //-- 為 --
  127.       0x00,0x10,0x10,0x12,0x14,0x1C,0x10,0xF0,
  128.       0x9F,0x10,0x10,0x10,0x10,0xF8,0x10,0x00,
  129.       0x00,0x00,0x40,0x20,0x10,0x08,0x06,0x01,
  130.       0x00,0x11,0x26,0x40,0x20,0x1F,0x00,0x00,
  131. //-- 徑 --
  132.       0x10,0x88,0xC4,0x73,0xA2,0x80,0x42,0x42,
  133.       0x22,0x12,0x2A,0x26,0x42,0xC0,0x80,0x00,
  134.       0x01,0x00,0xFF,0x00,0x40,0x41,0x41,0x41,
  135.       0x41,0x7F,0x41,0x41,0x41,0x41,0x40,0x00,
  136. //-- 學 --
  137.       0x40,0x30,0x10,0x12,0x5C,0x54,0x50,0x51,
  138.       0x5E,0xD4,0x50,0x18,0x57,0x32,0x10,0x00,
  139.       0x00,0x02,0x02,0x02,0x02,0x02,0x42,0x82,
  140.       0x7F,0x02,0x02,0x02,0x02,0x02,0x02,0x00,
  141. //-- 海 --
  142.       0x10,0x60,0x01,0xF6,0x00,0x10,0xF8,0x17,
  143.       0x34,0x54,0x14,0x14,0xF4,0x04,0x04,0x00,
  144.       0x04,0x04,0xFF,0x00,0x01,0x01,0x1F,0x11,
  145.       0x13,0x15,0x51,0x91,0x7F,0x11,0x11,0x00,
  146. //-- 無 --
  147.       0x00,0x40,0x42,0x42,0x42,0x42,0x42,0xFE,
  148.       0xC2,0x42,0x42,0x42,0x42,0x42,0x40,0x00,
  149.       0x40,0x40,0x20,0x10,0x08,0x04,0x03,0x00,
  150.       0x3F,0x40,0x40,0x40,0x40,0x40,0x70,0x00,
  151. //-- 涯 --
  152.       0x10,0x61,0x86,0x70,0x00,0xFE,0x82,0x92,
  153.       0x92,0xFE,0x92,0x92,0x92,0x82,0x82,0x00,
  154.       0x04,0xFC,0x43,0x20,0x18,0x47,0x44,0x44,
  155.       0x44,0x7F,0x44,0x44,0x44,0x44,0x40,0x00,
  156. //-- 苦 --
  157.       0x40,0x44,0x44,0x44,0x44,0x5F,0x44,0xF4,
  158.       0x44,0x44,0x5F,0x44,0x44,0x44,0x44,0x00,
  159.       0x00,0x00,0x00,0x7E,0x22,0x22,0x22,0x23,
  160.       0x22,0x22,0x22,0x7E,0x00,0x00,0x00,0x00,
  161. //-- 做 --
  162.       0x40,0x20,0xF8,0x07,0x8A,0x88,0xFF,0x88,
  163.       0xC8,0x30,0xFF,0x12,0xF0,0x10,0x10,0x00,
  164.       0x00,0x00,0x7F,0x00,0x3F,0x08,0x08,0x48,
  165.       0x5F,0x20,0x13,0x0C,0x13,0x70,0x20,0x00,
  166. //-- 舟 --
  167.       0x80,0x80,0x80,0x80,0xFC,0x84,0x86,0x95,
  168.       0xA4,0x84,0x84,0xFC,0x80,0x80,0x80,0x00,
  169.       0x00,0x80,0x40,0x30,0x0F,0x00,0x02,0x04,
  170.       0x0C,0x40,0x80,0x7F,0x00,0x00,0x00,0x00
  171. };



  175. //延時子程序
  176. //------------------------------

  178. void delay(uint m) //在時鐘頻率為
  179. { //12MHz時大約
  180.    uint i,j; //延時1ms
  181.     for(i=0;i<m;i++)
  182.     for(j=0;j<109;j++);
  183.    _nop_();
  184. }
  185. //-------------------------------------------
  186. //寫顯示數據
  187. //-------------------------------------------
  188. void SdData(uchar ddata)
  189. {
  190. delay(0); //延時等待
  191. RS = 1;
  192. RW = 0;
  193. lcd_bus = ddata; //送入數據
  194. E = 1;
  195. E = 0;
  196. }
  197. //-------------------------------------------
  198. //寫指令
  199. //-------------------------------------------
  200. void Sdcmd(uchar command)
  201. {
  202.   
  203. delay(0); //延時等待
  204. RS = 0;
  205. RW = 0;
  206. lcd_bus = command; //送入指令
  207. E=1;
  208. E = 0;

  210. }
  211. //-------------------------------------------
  212. //初始化
  213. //-------------------------------------------
  214. void Init()
  215. {
  216. _RST = 0;
  217. delay(150);
  218. _RST = 1; //硬件復位
  219. delay(100);
  220. Cs1=1;
  221. Cs2=1; //控制器全開
  222. Sdcmd(0x3f); //開顯示
  223. Sdcmd(0xc0); //設置起始地址
  224. }
  225. //-------------------------------------------
  226. //清空顯示內存
  227. //-------------------------------------------
  228. void CleanScreen()
  229. {
  230. uchar i,j,k;
  231. for(i=0;i<8;i++)
  232. {
  233. Cs1 = 1;
  234. Cs2=1;//控制器全開
  235. Sdcmd(0x40);
  236. Sdcmd(0xb8+i);
  237. Cs1=1;
  238. Cs2=0;
  239. for(j=0;j<64;j++)
  240. SdData(0x00);
  241. Cs1=0;
  242. Cs2=1;
  243. for(k=64;k<128;k++)
  244.    SdData(0x00);
  245. }
  246. }
  247. //-------------------------------------------
  248. //顯示圖象
  249. //-------------------------------------------
  250. void display()
  251. {
  252. uchar x,y,i,j,d,e;
  253. for(x=0;x<8;x++)
  254. {
  255.            ++e;
  256.    if(e==2)
  257.    {
  258.      i=16;
  259.      e=0;
  260. }
  261. else i=0;
  262. d=(x/2)*8;  
  263. Cs1 = 1;
  264. Cs2=1; //控制器全開
  265. Sdcmd(0x40); //設置列地址
  266. Sdcmd(0xb8+x); //設置頁地址
  267. Cs1 = 1;
  268. Cs2 = 0; //選擇控制器1
  269. for(y=0;y<4;y++)
  270.   {for(j=0;j<16;j++)
  271.    SdData(dis[y+d][j+i]); //寫入圖象編碼
  272.    }
  273. Cs1 = 0;
  274. Cs2 = 1; //選擇控制器2
  275. for(y=4;y<8;y++)
  276.   {
  277.    for(j=0;j<16;j++)

  279.    SdData(dis[y+d][j+i]); //寫入圖象編碼
  280. }
  281. }
  282. }  
  283.   
  284. //-------------------------------------------
  285. //主程序
  286. //-------------------------------------------
  287. main()
  288. {
  289. Init(); //初始化模塊
  290. CleanScreen(); //清除顯示內存
  291. display(); //顯示LOGO圖形
  292. while(1);
  293. } //end of program
復制代碼





作者: gaozhaohong    時間: 2015-2-7 15:33
不錯的資料。
作者: ztflove51    時間: 2015-2-11 10:07
我什么時候才能達到這個程度
作者: kes    時間: 2016-3-7 13:36
請問除了把12864連到單片機上，還使用了什么芯片輔助嗎？我用的是開發板但是編寫的程序也是不帶字庫的，結果固有端口就不能用了
作者: 5000322    時間: 2017-6-1 16:52
我下載后，不能顯示，怎么辦？
作者: 51hei55    時間: 2017-12-16 20:41
請問片選1 片選2  是要接到那里嗎  這在你的單片機上只是普通端口？
作者: WenDonlin    時間: 2018-7-16 11:09
請問漢字怎么轉為相應的代碼
作者: 調皮貓    時間: 2018-12-2 23:22
資料不錯，新盆友值得看看



歡迎光臨 (http://m.zg4o1577.cn/bbs/) Powered by Discuz! X3.1
主站蜘蛛池模板： 国产一区二区在线播放 | 中国农村毛片免费播放 | 亚洲精品一区二区在线观看 | 精品国产一区二区三区久久久蜜月 | 亚洲黄色在线 | 黑人黄色一级片 | 久久久夜色精品 | 夜夜操网站 | 色爱av | 成年人免费在线观看 | 男人操女人的网站 | 婷婷狠狠| 在线观看av的网站 | 亚洲免费看片 | 日韩精品一级 | 黄色三级av | 亚洲成人av一区二区 | 成年人视频在线免费观看 | 玖玖在线观看 | 国产99页 | 免费欧美视频 | 欧美久久久久久久 | 中文字幕免费在线看线人动作大片 | 91靠逼视频 | 狠狠干免费视频 | 国产三级在线播放 | 黄av在线 | 四虎新网址 | aaaaaa毛片 | 在线观看一区 | 免费的黄色网址 | 国产精品美女在线观看 | 大尺度做爰呻吟舌吻网站 | 在线观看黄色片 | 91丨九色丨国产在线 | 少妇性bbb搡bbb爽爽爽欧美 | av手机天堂 | 99亚洲精品| 午夜精品在线 | 日韩欧美三区 | 久久久久久久久久国产精品 |