久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

標題: STM32 Lib TIM1 CH1~4通道PWM使能 [打印本頁]

作者: liuqq 時間: 2015-5-18 23:30
標題: STM32 Lib TIM1 CH1~4通道PWM使能
void TIM1_PWM_RmapInit(u16 arr, u16 psc)
{
GPIO_InitTypeDef GPIO_InitStructure;
TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
TIM_OCInitTypeDef  TIM_OCInitStructure;

TIM_DeInit(TIM1);//初始化TIM1寄存器
RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1 | RCC_APB2Periph_GPIOE  | RCC_APB2Periph_AFIO, ENABLE);  //使能GPIO外設和AFIO復用功能模塊時鐘

GPIO_PinRemapConfig(GPIO_FullRemap_TIM1, ENABLE); //Timer1完全重映射  TIM1_CH1->PE9

//  設置該引腳為復用輸出功能,輸出TIM1 CH1的PWM脈沖波形 GPIOE.9
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9 | GPIO_Pin_11 | GPIO_Pin_13 | GPIO_Pin_14  ; //TIM1_CH1
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;  //復用推挽輸出
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
GPIO_Init(GPIOE, &GPIO_InitStructure);//初始化GPIO

//  TIM_InternalClockConfig(TIM1);//使用TIM1內部時鐘
TIM_TimeBaseStructure.TIM_Period =  arr;//f=72MHz/2/(3600+1)=10K
TIM_TimeBaseStructure.TIM_Prescaler = psc;//2分頻
TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
//  TIM_TimeBaseStructure.TIM_RepetitionCounter=0;//重復寄存器，用于自動更新pwm占空比
TIM_TimeBaseInit(TIM1, &TIM_TimeBaseStructure);

TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
//TIM_OCInitStructure.TIM_OutputNState=TIM_OutputNState_Disable;//選擇互補輸出比較狀態
TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;//設置輸出極性
TIM_OCInitStructure.TIM_OCNPolarity = TIM_OCNPolarity_Low; //設置互補輸出極性
TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Set; //空閑狀態下得非工作模式
TIM_OCInitStructure.TIM_OCNIdleState = TIM_OCNIdleState_Reset; //互補空閑狀態下得非工作模式
/* PWM1 Mode configuration: Channel1 */
TIM_OCInitStructure.TIM_Pulse = arr / 2;
TIM_OC1Init(TIM1, &TIM_OCInitStructure);
TIM_OC1PreloadConfig(TIM1, TIM_OCPreload_Enable);

/* PWM1 Mode configuration: Channel2 */
TIM_OCInitStructure.TIM_Pulse = arr / 2;
TIM_OC2Init(TIM1, &TIM_OCInitStructure);
TIM_OC2PreloadConfig(TIM1, TIM_OCPreload_Enable);

/* PWM1 Mode configuration: Channel3 */
TIM_OCInitStructure.TIM_Pulse = arr / 2;
TIM_OC3Init(TIM1, &TIM_OCInitStructure);
TIM_OC3PreloadConfig(TIM1, TIM_OCPreload_Enable);

/* PWM1 Mode configuration: Channel4 */
TIM_OCInitStructure.TIM_Pulse = arr / 2;
TIM_OC4Init(TIM1, &TIM_OCInitStructure);
TIM_OC4PreloadConfig(TIM1, TIM_OCPreload_Enable);

TIM_ARRPreloadConfig(TIM1, ENABLE);
TIM_Cmd(TIM1, ENABLE);
TIM_CtrlPWMOutputs(TIM1, ENABLE);

}

作者: 13480828805 時間: 2018-8-29 14:04
很好的資料，學習中

歡迎光臨 (http://m.zg4o1577.cn/bbs/)