久久久久久久999_99精品久久精品一区二区爱城_成人欧美一区二区三区在线播放_国产精品日本一区二区不卡视频_国产午夜视频_欧美精品在线观看免费

標題: 基于430f5529的無線按鍵傳輸 [打印本頁]

作者: MSP_430 時間: 2017-7-22 09:32
標題: 基于430f5529的無線按鍵傳輸
前幾天做了一用433M的無線傳輸，用430單片機發送和就收數據。但是很有很多的不足之處。現在想繼續用兩對這樣的模塊來實現雙工通信。
發送程序

#include "msp430.h"
#include "HAL_UCS.h"
#include "system.h"

#define uchar unsigned char
#define uint unsigned int

#define SET_DATA_PORT P6OUT |= BIT5;
#define CLR_DATA_PORT P6OUT &= ~BIT5;

uchar table[10]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};
uchar i=0,j=0,count=0;
void Port2_Init()
{
 P2DIR &= ~BIT1;
 P2OUT |= BIT1;
 P2REN |= BIT1;//設置上拉
 P2IES |= BIT1;//P2.1設置為下降沿觸發中斷方式
 P2IE |= BIT1;//使能P2.1中斷
 __enable_interrupt();
}

void Send_Start_Code()//引導碼
{
 SET_DATA_PORT;
 __delay_cycles(24000);//delay 5ms
 CLR_DATA_PORT;
 __delay_cycles(16000);
}

void Send_Data_Code(uchar bit)//數據碼
{
 if(bit)
 {
SET_DATA_PORT;
__delay_cycles(12000);//3000us high 2000us low 1
CLR_DATA_PORT;
__delay_cycles(8000);
 }
 else
 {
SET_DATA_PORT;
__delay_cycles(8000);
CLR_DATA_PORT;
__delay_cycles(12000);//2000us high 3000us low 0
 }
}

void Send_One_Byte(uchar data)//發送一個字節的數據
{
 uchar bi;
 for(i=0;i<8;i++)
 {
bi=data&0x80;
data=data<<1;
if(bi)
{
 Send_Data_Code(1);
}
else
{
 Send_Data_Code(0);
}
 }
}

int main( void )
{
 // Stop watchdog timer to prevent time out reset
 WDTCTL = WDTPW + WDTHOLD;
 System_Clock_Init();
 //Port2_Init();

 P4DIR |= BIT7;
 P4OUT |= BIT7;

 P6DIR |= BIT5;
 CLR_DATA_PORT;
 while(1)
 {
Send_Start_Code();
Send_One_Byte(0x3f);
Send_One_Byte(0x06);
Send_One_Byte(0x5b);
Send_One_Byte(0x4f);
Send_One_Byte(0x66);
Send_One_Byte(0x6d);
Send_One_Byte(0x7d);
Send_One_Byte(0x07);
Send_One_Byte(0x7f);
Send_One_Byte(0x67);
__delay_cycles(200000);
 }
}

接收程序

#include "msp430.h"
#include "HAL_UCS.h"
#include "system.h"

#define uchar unsigned char
#define uint unsigned int

#define DATA_INPUT P2IN&BIT0

uchar table[10];
uchar th,tl,i,j;

uchar Get_Start_Line()
{
 uchar i=0;
 while(DATA_INPUT&&i<50)//為1時循環，但不能超過8ms
 {
i++;
__delay_cycles(400);
 }
 return i;
}

uchar Get_High_Line()
{
 uchar i=0;
 while(DATA_INPUT&&i<80)//為1時循環，但不能超過8ms
 {
i++;
__delay_cycles(400);
 }
 return i;
}

uchar Get_Low_Line()
{
 uchar i=0;
 while(!DATA_INPUT&&i<60)
 {
i++;
__delay_cycles(400);
 }
 return i;
}

int main( void )
{
 // Stop watchdog timer to prevent time out reset
 WDTCTL = WDTPW + WDTHOLD;
 System_Clock_Init();
 P4DIR |= BIT7;
 P4OUT &= ~BIT7;
 P1DIR |= BIT0;
 P1OUT &= ~BIT0;
 P3DIR = 0xff;
 P3OUT = 0x3f;
 while(1)
 {
restart:while(!DATA_INPUT) P1OUT &= ~BIT0;

th=Get_High_Line();
if(th<55||th>65) goto restart;
tl=Get_Low_Line();
if(tl<35||tl>45) goto restart;//<3.5ms||>4.5ms

P1OUT |= BIT0;
for(j=0;j<10;j++)
{
 for(i=0;i<8;i++)
 {
 th=Get_High_Line();
 //if(th<15||th>35) goto restart;
 tl=Get_Low_Line();
 //if(tl<15||tl>35) goto restart;
 table[j]<<=1;
 if(th>22){table[j] |= 0x01;}
 }
}

P3OUT = table[0];
__delay_cycles(2000000);
P3OUT = table[1];
__delay_cycles(2000000);
P3OUT = table[2];
__delay_cycles(2000000);
P3OUT = table[3];
__delay_cycles(2000000);
P3OUT = table[4];
__delay_cycles(2000000);
P3OUT = table[5];
__delay_cycles(2000000);
P3OUT = table[6];
__delay_cycles(2000000);
P3OUT = table[7];
__delay_cycles(2000000);
P3OUT = table[8];
__delay_cycles(2000000);
P3OUT = table[9];
__delay_cycles(2000000);
 }
}

歡迎光臨 (http://m.zg4o1577.cn/bbs/)