- #include "sys.h"
- #include "delay.h"
- #include "usart.h"
- #include "led.h"
- #include "lcd.h"
- #include "key.h"
- #include "usmart.h"
- #include "malloc.h"
- #include "sdio_sdcard.h"
- #include "w25qxx.h"
- #include "ff.h"
- #include "exfuns.h"
- #include "text.h"
- #include "touch.h"
- #include "usart3.h"
- #include "common.h"
-
- int main(void)
- {
- u8 key,fontok=0;
- LED0=0;
- delay_init(); //延時函數初始化
- NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);//設置中斷優先級分組為組2：2位搶占優先級，2位響應優先級
- uart_init(115200); //串口初始化為115200
- usmart_dev.init(72); //初始化USMART
- LED_Init(); //初始化與LED連接的硬件接口
- KEY_Init(); //初始化按鍵
- LCD_Init(); //初始化LCD
- W25QXX_Init(); //初始化W25Q128
- tp_dev.init(); //初始化觸摸屏
- usart3_init(115200); //初始化串口3
- my_mem_init(SRAMIN); //初始化內部內存池
- exfuns_init(); //為fatfs相關變量申請內存
- f_mount(fs[0],"0:",1); //掛載SD卡
- f_mount(fs[1],"1:",1); //掛載FLASH.
- key=KEY_Scan(0);
- if(key==KEY0_PRES&&((tp_dev.touchtype&0X80)==0))//強制校準
- {
- LCD_Clear(WHITE); //清屏0
- TP_Adjust(); //屏幕校準
- TP_Save_Adjdata();
- LCD_Clear(WHITE); //清屏
- }
- fontok=font_init(); //檢查字庫是否OK
- if(fontok||key==KEY1_PRES) //需要更新字庫
- {
- LCD_Clear(WHITE); //清屏
- POINT_COLOR=RED; //設置字體為紅色
- LCD_ShowString(60,50,200,16,16,"ALIENTEK STM32");
- while(SD_Init()) //檢測SD卡
- {
- LCD_ShowString(60,70,200,16,16,"SD Card Failed!");
- delay_ms(200);
- LCD_Fill(60,70,200+60,70+16,WHITE);
- delay_ms(200);
- }
- LCD_ShowString(60,70,200,16,16,"SD Card OK");
- LCD_ShowString(60,90,200,16,16,"Font Updating...");
- key=update_font(20,110,16,"0:");//從SD卡更新
- while(key)//更新失敗
- {
- LCD_ShowString(60,110,200,16,16,"Font Update Failed!");
- delay_ms(200);
- LCD_Fill(20,110,200+20,110+16,WHITE);
- delay_ms(200);
- }
- LCD_ShowString(60,110,200,16,16,"Font Update Success!");
- delay_ms(1500);
- LCD_Clear(WHITE);//清屏
- }
- atk_8266_test(); //進入ATK_ESP8266測試
- }
代碼工程下載:
適合戰艦V3和精英STM32開發板）ATK-ESP8266 WIFI模塊(數據接收處理控制成功).7z
(1.3 MB, 下載次數: 45)
2021-7-25 17:05 上傳
點擊文件名下載附件
下載積分: 黑幣 -5
|
QQ好友和群
QQ空間
騰訊微博
騰訊朋友
收藏
淘帖
頂
踩
