#include <GLOBAL.h>
#include <stdlib.h>
#include <stdbool.h>
#include <msp430x41x.h>
//------------------------------------------
#define IicWpDirOut           P6DIR |=  BIT5
#define IicWpLow              P6OUT &=~ BIT5           
#define IicWpHig              P6OUT |=  BIT5

#define IicSclDirOut          P6DIR |=  BIT6
#define IicSclLow             P6OUT &=~ BIT6            
#define IicSclHig             P6OUT |=  BIT6
#define IicSdaDirOut          P6OUT &= ~BIT7
#define IicSdaLow             P6DIR |=  BIT7            
#define IicSdaHig             P6DIR &=~ BIT7
#define IicSdaInSt            P6IN  &   BIT7
bool AckErr;
//------------------------------ *** - 時間延時 - *** ------------------------------//
void Delay(unsigned int count)
{
   unsigned int i;
   _NOP();
   _NOP();
   for(i=count; i>0; i--);
}
void IIcDelay(void)
{
   _NOP();
}
//-----***-IIC初始化-***-----//
void IicInit(void)
{
IicWpDirOut;
IicSdaDirOut;
IicSclDirOut;
IicWpHig;
IicSdaHig;
IicSclHig;
}
//-----***-IIC啟示-***-----//
void IicStart(void)                 
{
      IicSdaHig;//IicSda=1;
      IIcDelay();
      IicSclHig;//IicScl=1;
      IIcDelay();
      IicSdaLow;//IicSda=0;
      IIcDelay();
      IicSclLow;//IicScl=0;
      IIcDelay();
}
//-----***-IIC停止-***-----//
void IicStop(void)                 
{
      IicSdaLow;//IicSda=0;
      IIcDelay();
      IicSclHig;//IicScl=1;
      IIcDelay();
      IicSdaHig;//IicSda=1;
      IIcDelay();
}
//-----***-IIC應答-***-----//
void SendAcknowledge(bool ack)               
{
      IicSdaDirOut;
      if(ack)//IicSda=ack;
      {
              IicSdaHig;
      }
      else
      {
              IicSdaLow;
      }
      IIcDelay();
      IicSclHig;//IicScl=1;
      IIcDelay();
      IicSclLow;//IicScl=0;
      IIcDelay();
}            
//-----***-從slave端讀取一個數據-***-----//
unsigned char IicReceiveByte(void)
{
      unsigned char i;
      unsigned char bytedata=0;
      
      IicSdaDirOut;
      IicSdaHig;//IicSda=1;
      for(i=0;i<8;i++)
      {
          IicSclHig;//IicScl=1;
          IIcDelay();
          bytedata<<=1;
          if(IicSdaInSt)
          {
                  bytedata |=0x01;
          }
          else
          {
                  bytedata &=0xfe;
          }
          IicSclLow;//IicScl=0;
          IIcDelay();
      }
      IicSdaDirOut;
      return bytedata;
}
//-----***-傳送一個 Byte 數據到 slave-***-----//
void IicSentByte(unsigned char DataByte)               
{
    unsigned char i;
    for(i=0;i<8;i++)
    {
        if(DataByte & 0x80)
     {
      IicSdaHig;//IicSda=1;
     }
     else
     {
      IicSdaLow;//IicSda=0;
     }
     DataByte <<=1;
     IIcDelay();
     IicSclHig;//IicScl=1;
     IIcDelay();
     IicSclLow;//IicScl=0;
     IIcDelay();
    }
    IicSdaHig;//IicSda=1;-----Y------D---IicSdaDirIn
    IIcDelay();
    IicSclHig;//IicScl=1;
    IIcDelay();
    IicSclLow;//IicScl=0;
    IIcDelay();
}
//-----***-無扇區讀---多字節-***-----//
//讀取指定器件無扇區指定地址多字節數據到指定地址
//Device=器件地址---單字節
//DataAdd=字節地址---單字節
void IicMuchByteRead(unsigned char DataAdd,unsigned char *DataDptr,unsigned char DataLend)
{
    unsigned char i;
    _DINT();
    WDT();
    IicInit();
    IicStart();
    IicSentByte(0xa0);
    IicSentByte(DataAdd);
    IicStart();
    IicSentByte(0xa1);
    for(i=DataLend-1;i>0;i--)
    {
          *DataDptr=IicReceiveByte();
          DataDptr++;
       SendAcknowledge(0);
    }
    *DataDptr=IicReceiveByte();
    SendAcknowledge(1);
    IicStop();
    WDT();
    Delay(500);
    _EINT();
}
//-----***-無扇區寫---多字節-***-----//
//寫入指定器件無扇區指定地址中的多字節數據
//Device=器件地址---單字節
//DataAdd=字節地址---雙字節
//DataByte=被存放數據的地址
//DataLend=被存放數據的長度
void IicMuchByteWrite(unsigned char DataAdd,unsigned char *DataDptr,unsigned char DataLend)
{
    unsigned char i;
    _DINT();
    WDT();
    IicInit();
    IicWpLow;
    IicStart();
    IicSentByte(0xa0);
    IicSentByte(DataAdd);
    for(i=DataLend;i>0;i--)
    {
        IicSentByte(*DataDptr);
        DataDptr++;   
    }
    IicStop();
    WDT();
    Delay(3500);
    IicWpHig;
    _EINT();
}

//---特別說明
//---利用430芯片來模擬IIC，是不能夠把SDA設置為輸出模式而是
//---設置為輸入，然后利用方向控制器來輸出高或者低
//---如下：
#define IicSdaDirOut          P6OUT &= ~BIT7
#define IicSdaLow             P6DIR |=  BIT7            
#define IicSdaHig             P6DIR &=~ BIT7
#define IicSdaInSt            P6IN  &   BIT7

相關文章