|
|
是用51hei單片機開發板 電路圖詳見：http://m.zg4o1577.cn/f/51hei-5.pdf 的數碼管部分， 用2個74hc573 鎖存，p0口作為數據口 ，p3.6和p3.7分別是段和位的鎖存端口.
- #include<reg52.h>
- #define uchar unsigned char
- #define uint unsigned int
- uchar code SEG7[10]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};
- sbit D=P3^6;
- sbit V=P3^7;
- //==================
- void delay(uint k)
- {
- uint i,j;
- for(i=0;i<k;i++){
- for(j=0;j<121;j++)
- {;}}
- }
- //================
- void main(void)
- {
- uchar cnt=0;
- D=1;P0=SEG7[0];D=0;P0=0xff;V=1;P0=0xf7;V=0;delay(5);
- while(1)
- {
- for(cnt=0;cnt<10;cnt++)
- {
- if(cnt<5)break;
- D=1;P0=SEG7[cnt];D=0;P0=0xff;V=1;P0=0xf7;V=0;delay(5);
- delay(1000);
- }
- }
- }
- #include<reg52.h>
- #define uchar unsigned char
- #define uint unsigned int
- uchar code SEG7[10]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};
- sbit D=P3^6;
- sbit V=P3^7;
- //==================
- void delay(uint k)
- {
- uint i,j;
- for(i=0;i<k;i++){
- for(j=0;j<121;j++)
- {;}}
- }
- //================
- void main(void)
- {
- uchar cnt=0;
- D=1;P0=SEG7[0];D=0;P0=0xff;V=1;P0=0xf7;V=0;delay(5);
- while(1)
- {
- for(cnt=0;cnt<10;cnt++)
- {
- if(cnt<5)continue;
- D=1;P0=SEG7[cnt];D=0;P0=0xff;V=1;P0=0xf7;V=0;delay(5);
- delay(1000);
- }
- }
- }
|
|
