1、半整數分頻占空比不為50%
//說明：設計的史上最好用的半整數分頻占空比不為50%，包含設計思路
module div_5(clk,clk_div,cnt1,cnt2,temp1,temp2);//N+0.5
input clk;
output clk_div;
output reg[31:0]cnt1,cnt2;
output reg temp1,temp2;
initial begin temp1=0;temp2=1;end //首先進行初始化，temp1=0;temp2=1
parameter N=5; //設定分頻系數為N+0.5
always @(posedge clk) //temp1上升沿跳變
begin
if(cnt1==2*N) //2*N
begin cnt1[31:0]<=32'd0;end
else begin cnt1[31:0]<=cnt1[31:0]+32'd1;end
if(cnt1==32'd0) begin temp1<=1;end //高電平時間為N+1;
if(cnt1==N+1) begin temp1<=0;end //低電平時間為N;
end
always@(negedge clk) //temp2下降沿跳變
begin
if(cnt2==2*N) //2*N
begin cnt2[31:0]<=32'd0;end
else begin cnt2[31:0]<=cnt2[31:0]+32'd1;end
if(cnt2==32'd0) begin temp2<=0;end //低電平時間為N;
if(cnt2==N) begin temp2<=1;end //高電平時間為N+1;
end
assign clk_div=temp1&&temp2; //邏輯與
endmodule
//如果要進行N+0.5分頻
//思路：總的來說要進行N+1+N=2N+1次分頻
//在時鐘的上升沿和下降沿都進行跳變
//上升沿進行占空比為N+1比N的時鐘temp1;
//下降沿進行占空比為N比N+1的時鐘temp2;
//最后div=temp1&&temp2 即可得到所需要的半整數分頻
2、奇數分頻占空比為50%
//說明：奇數分頻。
module div_5(clk,clk_div,cnt1,cnt2,temp1,temp2);//
input clk;
output clk_div;
output reg[31:0]cnt1,cnt2;
output reg temp1,temp2;
parameter N=5; //設定分頻系數
always @(posedge clk)
begin
if(cnt1==N-1) //N-1進行N計數
begin cnt1[31:0]<=32'd0;end
else begin cnt1[31:0]<=cnt1[31:0]+32'd1;end
if(cnt1==32'd0) begin temp1<=1;end //
if(cnt1==(N-1)/2) begin temp1<=0;end //當計數到(N-1)/2時翻轉
end
always@(negedge clk)
begin
if(cnt2==N-1) //N-1
begin cnt2[31:0]<=32'd0;end
else begin cnt2[31:0]<=cnt2[31:0]+32'd1;end
if(cnt2==32'd0) begin temp2<=1;end //;
if(cnt2==(N-1)/2) begin temp2<=0;end //當計數到(N-1)/2時翻轉;
end
assign clk_div=temp1||temp2; //邏輯或
endmodule
